CHSS-MT-SB200
Beam desking system
STRETCHS.
Seven components. Fourteen configurations. One office.
A single A-leg and beam chassis carries every table in the range — from an 800mm single desk to a 4-metre boardroom. Specify once, extend for a decade.
- Configuration
- Element code
- Meeting Table · Long Beam
- CHSS-MT-SB200
Length — mm
Depth — mm
Bill of components
- Long beamPRO-SB200-PC1 pc
- Bench legs, one pairCHSS-2BLEG-PC1 pc
- Bench mid legCHSS-BMLEG-PC2 pcs
- Wire boxCHSS-WBOX-PC°2 pcs
Codes marked ° are provisional — the part is confirmed, the number is not yet. Your quote carries the final SKU.
Price on request. Quantity, finish and installation move the number, so we quote rather than list.
The element set
Every table is three beams and four legs.
Nothing is bespoke. Add a beam length or a leg pair and the same chassis becomes a bench, a return, a boardroom table. Spares stay in stock because there are only seven part numbers to stock.
- 3.1
Short beam
BeamFor tops from 800 to 1000mm. Carries single tables and short benches.
PRO-SB110-PC
- 3.2
Medium beam
Beam1200 to 1600mm tops. The most specified beam in the range.
PRO-SB160-PC
- 3.3
Long beam
Beam1800mm and up, through to the 4000mm boardroom top.
PRO-SB200-PC
- 1
Four-leg package
LegsA full A-frame set at 720mm working height. Freestanding tables.
CHSS-4FLEG072-PC
- 2
Two-leg package
LegsOne pair, 720mm. Returns, connectors, small meeting tops.
CHSS-2FLEG072-PC
- 4
Bench legs, one pair
LegsEnd legs for back-to-back benching. Takes the beam load.
CHSS-2BLEG-PC
- 5
Bench mid leg
LegsIntermediate support between bench positions. Two to four per run.
CHSS-BMLEG-PC
Where a top exceeds 1200mm across, a supportive beam is added to the chassis. It is not an option — it ships with the configuration.
Anatomy
Ten parts, each with a gauge you can hold us to.
Bench · 2 seaters with side screens
Tap a number to look closer
Table top
Surface
- Core
- Particle board, T=25mm, E1 grade
- Finishing
- Melamine paper
- Edge banding
- T=2mm PVC
25mm core with a 2mm PVC edge — the edge is what survives ten years of chair arms.
Pick a number to read that part's gauge and finish. Materials are quoted from the manufacturer's specification sheet.
Finishes
Two tops, one frame, no surprises on site.
Nordic Oak
Melamine paper on E1 particle board, 25mm
PROS-TOP-NOK
Espresso Walnut
Melamine paper on E1 particle board, 25mm
PROS-TOP-EWL
Signal White frame
Powder coating, 80–120μ, on 1.5–2.0mm pipe
PROS-FRM-SWH
Graphite frame
Powder coating, 80–120μ, on 1.5–2.0mm pipe
PROS-FRM-GRA
Light Grey screen
Acoustic felt desk screen, beam-mounted
PROS-SCR-LGR
Swatches are rendered, not photographed — ask us for physical samples before you sign off a finish.
Size chart
Fourteen configurations, to the millimetre.
Working height is 720mm throughout, so tops sit flush wherever two configurations meet. Select a row to load it into the viewer above.
Enquire
Send us the floor. We'll send back the layout.
Our team quotes PROS with the beam schedule worked out — so what you receive is a component list and a drawing, not a line item.
Your selection
- Series
- STRETCHS Series — beam desking system
- Configuration
- Meeting Table · Long Beam
- Size
- 2400 × 1200 × 720 mm
- Top finish
- Espresso Walnut
- Element code
- CHSS-MT-SB200
- Quantity
- 12 positions